Product ID:4-(2,4-DICHLOROPHENOXY)BUTYRIC ACID, 530D-2
MSDS Date:03/01/1992
FSC:6810
NIIN:00N047408
MSDS Number: BVBVN

Emergency Phone: 321-965-0611

Info Phone: 321-965-0611

Cage: IO526

Telephone: 708-965-0611

Cage: 58378

BUTYRIC ACID, 4-(2,4-DICHLOROPHENOXY)-;

CAS: 94-82-6

RTECS: ES9100000

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:LD50:(ORAL,RAT) 700 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF SWALLOWED, INHALED, OR
ABSORBED THROUGH SKIN. CAUSES EYE AND SKIN IRRITATION. MATL IS
IRRIT TO MUCOUS MEMBRANES AND UPPER RESP TRACT. TO THE BEST OF THE
MFG KNOWLEDGE, THE CHEMICAL, PHYSICA L & TOXICOLOGICAL PROPERTIES
HAVE NOT BEEN THROUGHLY INVESTIGATED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:IMMED FLUSH W/COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. SKIN:IMMED WASH WITH SOAP & COPIOUS AMOUNTS OF WATER.
INHAL:REMOVE TO FRESH AIR. IF NOT BREATHING GIVE ARTIF RESP. IF
BREATHING IS DIFFICULT, GIVE OXYGEN. INGEST:WASH OUTMOUTH WITH
WATER PROVIDED PERSON IS CONSCIOUS. CALL A PHYSICIAN.

Extinguishing Media:WATER SPRAY. CARBON DIOXIDE, DRY CHEM POWDER OR
APPROPRIATE FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.

Spill Release Procedures:WEAR MIOSH/MSHA APPRVD SCBA, RUBBER BOOTS &
HEAVY RUBBER GLOVES. SWEEP UP, PLACE IN BAG AND HOLD FOR WASTE
DISPOSAL. AVOID RAISING DUST. VENTILATE AREA & WASH SPILL SITE
AFTER MATL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP TIGHTLY CLOSED. STORE IN A COOL
DRY PLACE. DO NOT BREATHE DUST. DO NOT GET IN EYES, ON SKIN, ON
CLOTHING. READILY ABSORBED THROUGH SKIN.
Other Precautions:TOXIC. IRRITANT. WEAR SUITABLE PROTECTIVE CLOTHING.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:USE ONLY IN A CHEMICAL FUME HOOD.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPVD CHEM WORK GOGG .
Other Protective Equipment:ANSI APPROVED SAFETY SHOWER AND EYE BATH .
Work Hygienic Practices:WASH THROUGHLY AFTER HANDLING. WASH CONTAM
CLTHG BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:T5
Melt/Freeze Pt:M.P/F.P Text:>244F,>118C
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:NOT KNOWN
Appearance and Odor:TAN CHIPS

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF:CARBON MONOXIDE, CARBON
DIOXIDE, HYDROGEN CHLORIDE GAS.

Waste Disposal Methods:DISSOLVE OR MIX THE MATL WITH A COMBUSTIBLE
SOLVENT AND BURN IN A CHEM INCINERATOR EQUIPPED WITH AN AFTERBURNER
AND SCRUBBER. OBSERVE ALL FEDERAL, STATE, AND LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.